0.5 Ton Honey Processing Machine SS304 Electric Honey Extractor

This 0.5 ton honey processing equipment includes 6 parts :
N0.1 is preheating /mixing tank made with 304 stainless steel 

NO.2 is electrical cabinet

NO.3 is the filter

NO.4 is the concentration tank with 80 Liters volume

NO.5 is the condenser for cooling water (Water can be recycled ),because we use water for heating the raw honey

NO.6 the black part is the vacuum pump. That is all for the structure .

 
Operation process of 0.5T Honey Processing Machine:

Before operation ,we should connect the electric cabinet to the
power supply ,and we also ensure the condenser be connected to the water source .After this ,now let's start the processing. Put the raw honey into the preheating and mixing tank , switch the heating and the stir button ,and at the same we should set the temperature and watch the temperature here ,and from here(thermometer)we can check the temperature of the raw honey insides the tank timely. When the temperature reaches to 60 degree Celsius ( Only for reference) ,the raw honey will be ready for flowing into the concentration tank .Now we should switch on the vacuum pump and open the valve here ,with the running of vacuum pump ,the raw honey will flow into the concentration tank .Here is the pressure gauge and this one is the temperature gauge , we can check the temperature insides the raw honey timely .From the inspection window ,we can check the situation inside the tank ,and when the pressure reaches to 0.08 Mpa ( for reference) ,the raw honey will be ready (after processing) ,until now the finished honey is produced ,then we can open the honey outlet .the finished honey will flow out from here ,until here the concentration process is finished .
Finally , we shall open the steam valve here,that is all for the processing of operation.

Parameters of 0.5 Ton Honey Processing Equipment

Details of 0.5 Ton Honey Processing Equipment:

Related Products: